Peel strength test machine is suitable for all kinds of plastic films, adhesives, adhesive tape, stickers, a medical patch, from paper, protective film, seal assemblage, backplane materials, non-woven fabrics, rubber, paper fiber, synthetic leather, composite materials, electronic, metal and other industries of materials and products do the stretching and compression, bending, shear, 90 degree peel, 180 degree peel, sticky together, tearing and other test, to determine the product quality.
Product features:
* this machine is simple tension testing machine, simple structure, easy to operate, can be placed on the bench test. The electronic control system, the speed regulating motor rotation, through the transmission mechanism reducer drive a T-shaped screw rod driven by rising and falling load sensor to complete the tensile or compression test. Force value is output by the sensor, feedback display, test displacement real-time display.
* 10 test reference points can be stored results, automatically calculate the average value, automatically grab the maximum value, the strength of the fracture.
* machine with thermal printer, can automatically output test results. (optional)
* this machine is simple and convenient to operate, and is especially suitable for the production line control of product quality testing equipment. This series of models are mainly applied to the test load of non metal and metal materials, less than 2000N.
Technical parameter:
Capacity selection: 2, 5,10,20,50100200kg
Measurement accuracy: the value of the value of 0.5%
Display mode: LCD screen Chinese display, film touch key
Unit switch: Kg, LB, N
Data sampling frequency: 200times/sec
Testing machine resolution: the maximum load of 1/ + 25000 yards, inside and outside the file, and the entire resolution unchanged
Load sensor: basic configuration: pull, pressure sensor (maximum load)
Effective test width: 150mm
Effective tensile space: 650mm
Test speed range: 50-300mm/min 5 speed stepless speed regulation and constant speed (speed can also be customized according to customer special requirements)
Displacement measurement accuracy: within the value of 0.5%
Breakpoint ratio setting: 0 ~ 99%, the user can follow the different materials set the appropriate break down time
Test bench safety device: up and down stroke limit device
Overload protection: more than 10% of maximum load, automatic machine protection
Fixture configuration: a set of tensile fixtures
Host size: 450 x 500 x 1400mm
Host weight: about 60 Kg
Power supply: 220V/50Hz